Causes For Garage Door Spring To Break And Tips For Prevention

garage door spring maintenance

Garage door springs lift the weight of the garage door. These springs work in cohesion to balance the weight, allowing the door opener to work flawlessly. 

Over time, the springs can break or become faulty. But, what exactly causes garage door springs to break? There could be several reasons. These might include general wear and tear, lack of regular maintenance, corrosion, and inappropriate use. 

Here are the reasons why the garage door springs break and how to look for the warning signs. Also, what are some preventive measures that will increase the longevity of the garage doors.

Common Causes of Garage Door Spring Breakage

Broken garage door springs can cause a lot of inconvenience. So, you should know what causes them. 

1. Wear and Tear

One of the biggest reasons for broken garage door springs is wear and tear. Every item has a rated number of cycles. Beyond that, it will perform less and will eventually become prone to break. And, the spring in your garage’s door is no different. 

Repetitive opening and closing of the doors will cause the springs to become loose and lose its strength over time. The door springs may last for about 12 to 13 years. Some high-quality springs may even last for about 20 years. 

2. Rust and Corrosion 

Another reason for broken garage door springs is rust and corrosion. If the springs are exposed to moisture for long periods of time, they will rust and will break after some time. Whenever there is rust on the springs, its lifespan gets reduced. 

The coils experience more friction when the garage door moves up and down. This is because of the rust. Additionally, the corrosion on the door springs weakens the coils and can result in complete failure of the coils. Keep in mind that corrosion is due to excessive chemicals and moisture. Lubricating the springs will help you prevent corrosion to a great extent. 

3. Poor Maintenance

Garage door springs will fail after some time. But regular maintenance will prolong its lifespan. Also, it will alert you before failing to operate completely. Proper maintenance helps prevent explosive breaking of the springs as well.

Regular maintenance will have a positive impact on your garage door, too. Inspecting the different parts of the door regularly can help you avoid premature failure. To improve the longevity of the door and its springs, never forget about maintenance.

4. Incorrect Spring Type or Size

An incorrect type or size of door springs can result in a breakage. If you use the wrong size or type of spring during the installation process, the door can’t handle normal use. You can expect wear and tear faster than normal. 

Moreover, it could lead to a sudden failure because of the excess strain on the springs. It is wise only to work with an expert when it comes to installing garage door springs. While DIY might seem an attractive proposition, professional work will keep you on the safe side. 

5. Excessive Weight on the Door

Overloading will reduce the lifespan of your door spring. Excess weight on the door will make the springs work hard. They will become weak and break eventually. 

The springs are made from steel that can handle a considerable amount of stress. This is why you need to have a regular maintenance plan for your garage door.

Early Signs of a Potential Spring Failure

By now, you are aware of the reasons that can cause your garage door spring to break. But how do you know if the springs are about to fail? Here are some common signs of a spring failure.

1. Unusual Noises

If you are hearing unusual noises coming from your garage door, chances are that the torsion spring has burst. It will make an irritating, loud noise whenever you try to open or close the garage door. 

Due to intense tension, the noise of the spring will accompany a loud pop. Besides, you will have problems operating the garage door. In that case, you have to replace the springs immediately. If you hear a loud noise most of the time from the garage door, it is best to call an expert. 

2. Difficulty in Opening and closing

You may feel like the garage door has become too hard to open or close. Probably, the springs used to support the door are broken. In some cases, the door might open, but it won’t go higher than it should. The door will lift a few inches and stay in that position.

There are springs on both sides of the door. And, they make the door go up and down smoothly. If the springs fail to operate, the door won’t move. 

3. Visible Wear or Damage

If your garage door is not functioning as it should, chances are that the springs are malfunctioning or broken. Hence, you have to look for visible signs that indicate you have faulty garage door springs. Loose cables are the signs of a broken spring.

If you notice the cables are slack or loose, the spring will have a hard time functioning smoothly. The cables should be kept in their place because of the tightly woven tension springs. But when the springs break, the cable will start to unwind and slip out. 

Next, inspect the torsion spring. Typically, it will have one or two springs. Both are wound tightly on the overhead door. If they break, you will notice a visible gap between them. Seek professional help because DIY fix can make matters worse.

Preventive Measures that Increase the Lifespan of the Garage Doors

Do you want your garage door to operate smoothly for many years to come? We recommend keeping certain preventive measures in mind. 

1. Regular Maintenance and Inspection 

When it comes to keeping your garage door springs healthy, regular maintenance and inspection are crucial. Garage door springs come with a limited timeframe. You want to ensure that the springs will last at least 11-12 years. 

Routine check-up of the important components of the garage door is a must. Neglecting maintenance may result in operational issues in the future. A broken spring will make the door inoperable. It can result in damage to property or self-injuries. 

2. Proper Lubrication 

To keep the door springs from corrosion and breaking apart, you need to keep them lubricated. To do so, you can use WD-40 and start spraying the spring. It’s an effective way to keep the overhead door in good shape.

You will see a lot of options in terms of lubricants like mechanic’s grease. But a good lubricant for your garage door should be silicone-based lubricants or lithium-based grease. 

3. Professional Installation and Adjustment

It is always better to opt for professional installation and adjustment when it comes to your garage door. These springs hold deadly force. It’s not worth taking risks on what seems like a DIY project.

Professional installation means enhanced safety, optimal performance, and increased lifespan of your garage doors. An improper installation and adjustment can lead to poor performance, malfunctions, and safety hazards. 

If you want to extend the life of your garage door, never neglect the importance of maintenance. Monitoring the essential parts of the garage door keeps you away from premature failure. Working with professionals will ensure proper installation and timely maintenance.